How to Assemble the Warm & Clean Bundle Step by Step

Quick answer

To assemble the Warm & Clean Bundle, start by unboxing and placing the Steriliser Dryer Advanced on a flat, stable surface, then set up the Bottle & Breastmilk Warmer nearby. Follow the steps below for a smooth first use.

Step-by-step assembly

1. Unbox and inspect: Carefully remove both units from the box. Check that you have the Steriliser Dryer Advanced, the Bottle & Breastmilk Warmer, and any included accessories. Remove all protective film and packaging. Make sure the HEPA filter is present and not damaged before proceeding.
2. Place the Steriliser Dryer Advanced: Position the steriliser on a flat, stable surface, away from the edge. Ensure there's at least 10 cm of clearance around the unit for ventilation. Do not place it under cabinets that could be affected by steam. Check that the surface is level to prevent water spillage during the cycle.
3. Install the HEPA filter: Open the filter compartment (usually on the back or side) and insert the HEPA filter as indicated in the manual. Make sure it clicks into place securely. A loose filter may reduce drying efficiency and let in airborne particles.
4. Add water and load items: Fill the water tank with fresh, cold tap water to the indicated level. Place bottles, pump parts, or accessories upside down on the baskets, ensuring they are not overcrowded. Do not exceed the maximum water line; overfilling can cause overflow during the cycle.
5. Run a first cycle: Plug in the steriliser and select the sterilise and dry cycle. Let it run without any items for the first cycle to clean the internal system. Then, run a cycle with your bottles. After the cycle, items remain sterile for 24 hours if the steriliser is left unopened.
6. Set up the Bottle & Breastmilk Warmer: Place the warmer on a separate flat surface. Fill the warming chamber with water to the recommended level. Plug it in and test with a bottle of water to learn the warming times. Never leave the warmer unattended while in use, and always follow the manual's temperature guidelines.

Product facts

• WARM & CLEAN BUNDLE: Steriliser Dryer Advanced + Bottle & Breastmilk Warmer: The Steriliser Dryer Advanced automatically sterilises and dries all brands of bottles, pump parts, and accessories, and includes a replaceable HEPA filter. This means you can use any bottle brand, and the HEPA filter ensures hygienic drying, but you'll need to replace the filter periodically to maintain performance.