How to Descale Your Baby Brezza Bottle Washer Pro

Quick Answer

Descale your Baby Brezza Bottle Washer Pro every 1-2 months using the official Baby Brezza Descaling Tablets to remove mineral buildup and keep the machine running smoothly.

Step-by-Step Descaling Instructions

1. 1. Prepare the Machine: Remove any bottles, nipples, or accessories from the Bottle Washer Pro. Empty the water tank completely. Common mistake: leaving accessories inside can trap descaling solution residue.
2. 2. Add the Descaling Tablet: Place one Baby Brezza Descaling Tablet into the empty water tank. Do not crush or break the tablet. Checkpoint: never use more than one tablet per cycle — overdosing won't clean faster and may leave residue.
3. 3. Fill and Run the Descaling Cycle: Fill the water tank to the MAX line with fresh water. Close the lid and select the 'Descale' cycle on the control panel. Press start. Common mistake: using hot water instead of cold can cause the tablet to fizz too quickly and reduce effectiveness.
4. 4. Rinse Thoroughly: Once the descaling cycle finishes, empty the tank and refill with clean water. Run a full rinse cycle (without any tablet) to remove all traces of the descaling solution. Checkpoint: if you smell or see any residue, run a second rinse cycle before using the machine for bottles.
5. 5. Wipe Down the Exterior: Use a damp cloth to wipe the exterior and door seal. Dry with a soft towel. Common mistake: forgetting to dry the seal can lead to mold growth between uses.

Product Used in This Guide

• Baby Brezza Bottle Washer Pro Descaling Tablets: These tablets are exclusively made for the Baby Brezza Bottle Washer Pro and effectively remove limescale and mineral deposits. Using the right tablets ensures the descaling solution is safe for baby bottles and won't damage the machine's internal components.