Steriliser Dryer Tongs and Bottle Posts: Care and Replacement

Quick answer

Replace the tongs when they lose grip or show heat damage, and replace bottle posts when they crack, discolour, or no longer hold bottles upright. For the Steriliser Dryer Advanced, the genuine Steriliser Dryer Replacement Tongs and Steriliser Dryer Replacement Bottle Posts (6pcs) are the correct fit. If you are unsure which part is worn, start by inspecting the posts first, as they take the most daily load.

How to tell when tongs or bottle posts need replacing

Tongs and bottle posts wear differently. Tongs fail gradually: the tips may become smooth, bent, or stiff, making it harder to lift hot items without slipping. Bottle posts fail more visibly: look for cracks, white stress marks, or a loose fit in the base. If a post wobbles when you set a bottle on it, it is no longer doing its job.

Heat exposure is the main cause of wear. Even with regular cleaning, repeated steam and hot-air cycles slowly degrade these small plastic parts. A good rule is to inspect both after every few cycles and replace at the first sign of damage. Do not wait for a complete failure, as a dropped bottle can waste a full sterilising cycle.

Cleaning and care that extends part life

Hand wash tongs and bottle posts in warm soapy water, then rinse and air dry completely before putting them back in the steriliser. Avoid abrasive brushes or harsh chemicals, which can scratch the surface and create places for bacteria to hide. Most parts are not dishwasher safe unless the manual says otherwise, so check your Steriliser Dryer User Manual first.

Store spare parts in a dry, dust-free place. If you keep a spare set of posts or tongs, label them so you know which are new and which are in use. Rotating between two sets can reduce wear on any single set, but always replace a damaged part immediately rather than waiting for a convenient time.

Choosing the right replacement parts

Not all steriliser parts are interchangeable. The Steriliser Dryer Replacement Tongs are designed specifically for the Steriliser Dryer Advanced, and the Steriliser Dryer Replacement Bottle Posts (6pcs) are also for that model. Using parts from another brand or model can lead to poor fit, unstable bottles, or damage to the steriliser itself.

When you order, check the model name on your machine. If you have a different Baby Brezza steriliser, these specific parts may not fit. The product pages list compatibility, so match that to your model before buying. If you are replacing both tongs and posts at the same time, you can restore the full handling and drying setup in one go.

What to keep on hand

A spare set of bottle posts is useful because they are the parts most likely to break first, especially if you sterilise frequently. The 6-piece pack gives you a full replacement set plus extras for future wear. Tongs are less likely to break but can lose grip over time, so having a spare pair means you are never stuck without a safe way to remove hot items.

If you use your steriliser multiple times a day, consider replacing posts every few months as a preventive measure, even if they look fine. This is cheaper than risking a damaged bottle or a interrupted routine. For occasional use, inspect before each cycle and replace only when you see wear.

Decision rules for replacing tongs and bottle posts

• Tongs: replace if grip slips: If tongs feel smooth, bent, or stiff, or if items slip during handling, replace them. Do not try to reshape or repair them. A new pair restores safe handling immediately.
• Bottle posts: replace if cracked or loose: Inspect posts for cracks, white marks, or wobble. If any post fails, replace the full set to keep drying level and stable. A 6-piece set covers all positions and gives spares.
• Model check before ordering: Confirm your steriliser is the Steriliser Dryer Advanced. These parts are not universal and may not fit other models. Match the model name on your machine to the product listing.

Genuine parts for the Steriliser Dryer Advanced

• Steriliser Dryer Replacement Bottle Posts (6pcs): Steriliser Dryer Replacement Bottle Posts (6pcs) for the Steriliser Dryer Advanced. A full set of six posts lets you replace all worn posts at once, so bottles stand securely during drying.
• Steriliser Dryer Replacement Tongs: The Steriliser Dryer Replacement Tongs are a genuine Baby Brezza UK part designed to replace the original tongs for the Steriliser Dryer Advanced. This single replacement unit restores the ability to handle sterilised items safely and conveniently. Genuine tongs ensure a reliable grip and correct fit, so you can remove hot items without slipping.

Who these parts are for

Best for

• Owners of the Baby Brezza Steriliser Dryer Advanced who need to replace worn tongs or bottle posts
• Households that sterilise daily and want to keep a spare set of posts on hand

Not for

• Owners of other Baby Brezza steriliser models or different brands, as these parts are model-specific
• Anyone looking for a full steriliser unit rather than replacement parts