Steriliser Dryer Filter Cover Care Guide
By Baby Brezza UK | Published: 2026-10-21
Category: Tips & Care
Learn how to clean and maintain your Baby Brezza Steriliser Dryer Replacement Filter Cover to keep your steriliser running efficiently.
Quick answer
Regularly clean the filter cover and replace it every 6-12 months to maintain optimal drying performance and prevent bacterial buildup.
Why filter cover care matters
The filter cover traps lint, dust, and mineral deposits from the drying cycle. A clogged cover reduces airflow, making drying slower and less effective. It can also trap moisture, which encourages mould or bacteria near your sterilised bottles.
Cleaning the cover is quick and doesn't require tools. Replacing it when worn ensures your steriliser dryer continues to work as designed.
How to care for your steriliser dryer filter cover
- Unplug and remove the cover: Unplug the steriliser dryer. Locate the filter cover on the back or side (check your manual). Gently press the tabs or clips to release it. Never clean the cover while the unit is plugged in.
- Rinse under warm water: Hold the cover under warm running water. Use a soft brush or your fingers to dislodge lint and debris from the mesh. Do not use soap or detergent—they can leave residue that traps more dirt. Soap residue can reduce drying efficiency and leave a smell.
- Shake dry and air dry completely: Shake off excess water and place the cover on a clean towel. Let it air dry fully (at least 2–3 hours) before reinstalling. Reinsert the cover, ensuring it clicks into place. Reinstalling a wet cover can trap moisture and promote mould growth.
- Inspect monthly and replace when needed: Check the cover monthly for cracks, warping, or stubborn buildup that rinsing won't remove. Replace it every 6–12 months or sooner if you notice reduced drying performance. A warped or cracked cover won't seal properly—replace it immediately.
Product facts
- Steriliser Dryer Replacement Filter Cover: 1 x Steriliser Dryer Replacement Filter Cover for the Steriliser Dryer Advanced This genuine part fits your Steriliser Dryer Advanced and restores proper airflow after the original cover wears out.
Steriliser Dryer Replacement Filter Cover
